The MIRA Safety® MOPP-1 CBRN Protective MOPP Suit provides next-generation protection from chemical, biological, and even nuclear threats.
Whereas most traditional MOPP gear is engineered to be impermeable, the MIRA Safety® MOPP-1 CBRN Protective Suit has the same advanced semipermeable construction as the suits used by the US Military.
Thanks to its special construction that includes an integrated layer of embedded carbon spheres, this MOPP gear effectively "breathes" while providing total body protection to the user. As a result, it can be worn for much longer periods in hazardous environments because the risk of exhaustion or dehydration is reduced.
It's also engineered to be far more durable than the average CBRN MOPP gear. With its semi-permeable construction, the MOPP Suit is designed to be worn during active duty use and for long periods in response to elevated threat levels. Most hazmat suits are designed for one-time use, but the MIRA Safety® MOPP-1 CBRN Protective Suit will last a minimum of 30 days under average use conditions and up to 10 decontamination washes.
If the suit and user are not exposed to direct CBRN threats, the suit can be worn for up to 10 years, presuming it is not damaged or compromised.
Featuring superior puncture resistance and a digital camouflage pattern, the MIRA Safety® MOPP-1 CBRN Protective Suit is a top-tier solution that protects against chemical warfare agents (CWA) and toxic industrial chemicals (TIC).
The MIRA Safety® MOPP-1 CBRN Protective Suit delivers protection above and beyond anything else available on the civilian market today.
Indeed, it's even superior to the protective gear trusted by most military, police, and professional operators worldwide. Most entry-level biohazard suits are only designed to provide limited protection for workers on a job site and are designed to be replaced after a single day's use, with more focus on affordability than extended protection.
Higher-grade hazmat suits can provide a wider range of protection, but they're also limited in that they are impermeable. So, in addition to keeping threats out, they keep air out too. As a result, the use time for these types of hazmat suits is limited. When performing work that requires strenuous effort, users can become dehydrated or exhausted after as little as an hour of work.
The first MOPP Suits were developed to solve a specific challenge for the military—allowing soldiers to maintain maximum readiness and mobility without compromising on protection from gas and vapor threats.
The MOPP-1 is the latest evolution of protective suits, engineered to provide all-day comfort and protection from direct exposure to deadly chemical and toxic threats. It's available in multiple sizes to fit various body types.
When stored in its original packaging in appropriate conditions (see below), the MOPP-1 CBRN Protective Suit will last ten years.
Remember, when wearing a MOPP Suit, users will require the addition of a functioning full-face respirator, a properly CBRN-rated filter, butyl gloves, and boots to ensure proper protection from airborne contaminants, radioactive particles, and other threats.
For storage after use, we recommend purchasing clothing storage bags that are hermetically sealed and come with a hand pump. These bags usually feature a double zip and a triple seal valve, ensuring a perfect hermetically-seal that will reduce the size of your MOPP-1 Suit by up to 50% for easier long-term storage.
The MOPP-1 CBRN Protective Suit should be stored either in the original packaging at temperatures from -30°C to +50°C or in a hermetically sealed bag, with a relative humidity of up to 80% and without direct exposure to sunlight or heat sources.
Under these conditions, the suit's shelf life is at least ten years.
MOPP Suit Cleaning and Maintenance
After exposure or use, the CBRN MOPP-1 Suit should be cleaned and disinfected according to the manufacturer's instructions included with the packaging. Your MOPP-1 Suit can be washed up to 10 times in this manner without compromising its protective abilities. Once a suit has been washed ten times, remove it from rotation. Never use a MOPP Suit that is not properly disinfected and decontaminated. In case of doubt, dispose of the suit in accordance with local regulations, and use a new one. The MOPP-1 Suit requires zero end-user maintenance. If a suit is compromised, torn or cut, DO NOT attempt to repair it.
Samples
The details of the received samples are presented in Table 1.
Table 1: Received samples
| Sample code |
Description by Customer |
received |
| 20PQ2305 |
Outer shell: 0QAMEU0476, open ripstop with DWR&FR finish, new |
04-11-2020 |
| 20PQ2306 |
Filter layer: ALLGO0002N, sphere filter, 345 g/m2 3 ply filter with 04-11-2020 non woven white and sphere active carbon and black knit, new |
04-11-2020 |
| 20PQ2307 |
Outer shell: 0AAMEU0476, open ripstop with DWR&FR finish,pie 10x washed ISO 6330, 4N, tumbler dry low temperature |
04-11-2020 |
| 20PQ2308 |
Filter layer: ALL60002N, sphere filter, 345 g/m2 3 ply filter with non woven white and sphere active carbon and black knit, 10x washed ISO 6330, 4N, tumbler dry low temperature |
04-11-2020 |
Test Method
The detailed description of the test procedures is presented in the Annex.
Results
The test results are presented in Tables 2 through 9. Note that the test results are only applicable to the tested materials, mentioned in Table 1.
Table 2: Laid droplet, convective flow 5 m/s, HD, 10 g/m? (80% RH, 30°C, 24 hours, 1)
| Sample code |
State |
Velocity through sample
(cm/s) |
Penetrated dose
(mg.min/m3) |
| 20PQ2306/20PQ2305A |
New |
2.2 |
482 |
| 20PQ2306/20PQ2305B |
New |
2.2 |
347 |
| 20PQ2306/20PQ2305C |
New |
2.3 |
485 |
| 20PQ2308/20PQ2307A |
Washed10x |
1.3 |
181 |
| 20PQ2308/20PQ2307B |
Washed10x |
1.3 |
268 |
| 20PQ2308/20PQ2307C |
Washed10x |
1.5 |
292 |
Table 3: Vapour test 5 m/s, HD, target concentration 11 mg/m? (80% RH, 30°C, 6 hours)
| Sample code |
State |
Challenge
(mg/33) |
Velocity through sample
(cm/s) |
Penetrated dose
(mg.min/m3) |
| 20PQ2306/20PQ2305A |
New |
11 |
2.2 |
65 |
| 20PQ2306/20PQ2305B |
New |
11 |
2.6 |
80 |
| 20PQ2306/20PQ2305C |
New |
11 |
2.8 |
107 |
| 20PQ2308/20PQ2307A |
Washed10x |
11 |
1.3 |
25 |
| 20PQ2308/20PQ2307B |
Washed10x |
11 |
1.3 |
14 |
| 20PQ2308/20PQ2307C |
Washed10x |
11 |
1.5 |
28 |
Table 4: Vapour test 1 m/s, HD, target concentration 55 mg/m? (80% RH, 30°C, 6 hours)
| Sample code |
State |
Challenge
(mg/33) |
Velocity through sample
(cm/s) |
Penetrated dose
(mg.min/m3) |
| 20PQ2306/20PQ2305A |
New |
56 |
0.11 |
<12 |
| 20PQ2306/20PQ2305B |
New |
56 |
0.11 |
<12 |
| 20PQ2306/20PQ2305C |
New |
56 |
0.9 |
<14 |
| 20PQ2308/20PQ2307A |
Washed10x |
56 |
0.7*
|
<20 |
| 20PQ2308/20PQ2307B |
Washed10x |
56 |
0.7*
|
<20 |
| 20PQ2308/20PQ2307C |
Washed10x |
56 |
0.7*
|
<20 |
Due to equipment restrictions, the minimum flow of 50 ml/min (= 0.07 cm/s) was applied, instead of the required 42-48 ml/min.
Table 5: Vapour test 5 m/s, GD, target concentration 11 mg/m® (80% RH, 30°C, 6 hours
| Sample code |
State |
Challenge
(mg/33) |
Velocity through sample
(cm/s) |
Penetrated dose
(mg.min/m3) |
| 20PQ2306/20PQ2305A |
New |
11 |
1.8 |
60 |
| 20PQ2306/20PQ2305B |
New |
11 |
1.9 |
51 |
| 20PQ2306/20PQ2305C |
New |
11 |
1.9 |
68 |
| 20PQ2308/20PQ2307A |
Washed10x |
11 |
1.6 |
38 |
| 20PQ2308/20PQ2307B |
Washed10x |
11 |
1.5 |
48 |
| 20PQ2308/20PQ2307C |
Washed10x |
11 |
1.5 |
29 |
Table 6: Vapour test 1 m/s, GD, target concentration 55 mg/m3 (80% RH, 30°C, 6 hours)
| Sample code |
State |
Challenge
(mg/33) |
Velocity through sample
(cm/s) |
Penetrated dose
(mg.min/m3) |
| 20PQ2306/20PQ2305A |
New |
55 |
0.07 |
<14 |
| 20PQ2306/20PQ2305B |
New |
55 |
0.10 |
<10 |
| 20PQ2306/20PQ2305C |
New |
55 |
0.10 |
<10 |
| 20PQ2308/20PQ2307A |
Washed10x |
55 |
0.07*
|
<16 |
| 20PQ2308/20PQ2307B |
Washed10x |
55 |
0.07*
|
<16 |
| 20PQ2308/20PQ2307C |
Washed10x |
55 |
0.07*
|
<16 |
Due to equipment restrictions, the minimum flow of 50 ml/min (= 0.07 cm/s) was applied, instead of the required 42-48 ml/min.
Table 7: Laid droplet 0.5 m/s diffusive flow HD, 10 g/m? 30°C, 24 hours, 1ul drops)
| Sample code |
State |
Penetrated amount
(ug/cm2) |
| 20PQ2306/20PQ2305A |
New |
<0.08 |
| 20PQ2306/20PQ2305B |
New |
1.0 |
| 20PQ2306/20PQ2305C |
New |
<0.08 |
| 20PQ2308/20PQ2307A |
Washed10x |
<0.08 |
| 20PQ2308/20PQ2307B |
Washed10x |
<0.08 |
| 20PQ2308/20PQ2307C |
Washed10x |
<0.08 |
Table 8: Laid droplet 0.5 m/s, diffusive flow GD, 10 g/m? (80% RH,30°C, 24 hours, 1ul drops)
| Sample code |
State |
Penetrated amount
(ug/cm2) |
| 20PQ2306/20PQ2305A |
New |
0.53 |
| 20PQ2306/20PQ2305B |
New |
0.32 |
| 20PQ2306/20PQ2305C |
New |
0.14 |
| 20PQ2308/20PQ2307A |
Washed10x |
0.12 |
| 20PQ2308/20PQ2307B |
Washed10x |
<0.06 |
| 20PQ2308/20PQ2307C |
Washed10x |
0.10 |
Table 9: Laid droplet, diffusive flow LVAP, VX, 10 g/m? (5% RH, 30°C, 24 hours, 1ul drops)
| Sample code |
State |
Penetrated amount
(ug/cm2) |
| 20PQ2306/20PQ2305A |
New |
1.0 |
| 20PQ2306/20PQ2305B |
New |
0.93 |
| 20PQ2306/20PQ2305C |
New |
0.21 |
| 20PQ2308/20PQ2307A |
Washed10x |
0.30 |
| 20PQ2308/20PQ2307B |
Washed10x |
0.41 |
| 20PQ2308/20PQ2307C |
Washed10x |
0.48 |
The MOPP-1 CBRN Protective suit is available in three different sizes (available as size pairs):
- Small - Medium (SM/MD)
- Large - Extra Large (LG/XL)
- 2X Large -3X Large (2XL/3XL)
- Youth Small (Youth S)
- Youth Medium (Youth M)
- Youth Large (Youth Large)
