The CM-I01® Full Face Respirator is ruggedized and designed for general preparedness, home use, industrial, marine, medical, agricultural, and chemical applications.
This class-3 respirator provides superior protection against common workplace threats and toxic industrial chemicals, and lasting-comfort that makes it easy to use throughout your workday.
Key Features of the MIRA Safety® CM-I01® Full Face Respirator
- Designed to help protect the user from gases, vapors, solids, and liquid particulates
- Compatible with any 40mm NATO standard gas mask filter for interchangeability
- Advanced valve design optimizes airflow and comfort
- Panoramic Class 1 (EN 166) visor with scratch-resistant finish for maximum field of view
- Highly adaptable to comfortably fit various face shapes
- 5-point adjustable head harness designed for maximum breathability and comfort
- Hypoallergenic oro-nasal cup minimizes fogging
- Available in 2 colors: Black and Olive Green (red, orange, white, and aquamarine colors coming soon)
- Ballistic resistance (STANAG 2920)
- 10-year shelf life with a 1-year warranty for long-term usage
- Class 3 certified according to EN 136:1998 and European Regulation 2016/425
- Made in Italy
Technical Specifications of the CM-I01® Full-Face Respirator
Featuring a state-of-the-art design with a one-piece visor, the CM-I01® uses standard 40-mm gas mask cartridges to protect the user from various toxins, chemicals, or hazardous byproducts on the job site or at home.
The visor is made from polycarbonate (with a special scratch-resistant coating) and the mask frame and oro-nasal cup are constructed from thermoplastic rubber. Connectors are polyamide (PA) and the harnesses made from EPDM.
Thanks to its unique design, the CM-I01® contours to fit a wide range of face shapes and sizes while retaining a perfect seal and protecting the user.
The CM-I01® is a certified class 3 respirator, meaning it meets minimum standards for mechanical, heat, and flame resistance. End-user maintenance is minimal, with no tools required.
The CM-I01® comes with a 1-year warranty from MIRA Safety®.
IMPORTANT NOTE: The CM-I01® is designed for industrial/general use and is NOT a CBRN gas mask considering the face seal is not resistant to blister agents. This mask will work to block many CBRN agents when coupled with the appropriate filter, but considering the rubber, it is not intended to be a dedicated CBRN mask. Filters for the CM-I01® are sold separately.
TECHNICAL DATA of CM-I01® of Full-Face Respirator
|
WEIGHT
|
571g
|
|
SIZE
|
Medium
|
|
MATERIAL OF THE FACEPIECE
|
Thermoplastic rubber
|
|
VISOR
|
Complies with EN 136:2000
|
|
MATERIAL OF THE VISOR
|
Polycarbonate
|
|
FILTER CONNECTION THREAD
|
Rd 40 x 1/7"
|
|
|
|
INHALATION RESISTANCE
|
1.18 mbar (118 Pa)
|
|
EXHALATION RESISTANCE
|
0.92 mbar (92 Pa)
|
|
WEIGHT
|
571g
|
|
SIZE
|
Medium
|
Storage Temperature of CM-I01® of Full-Face Respirator
-10°C to 50°C (-50°F to 122°F)
Relative humidity <80%
STORAGE of CM-I01® of Full-Face Respirator
The CM-I01® Full-Face Respirator must be stored in a dark, cool, and dust-free place free from sudden temperature changes. The storage environment should be ventilated regularly. Temperatures may vary between 10°C and 50°C (-50°F to 122°F), with relative humidity up to 65%. Full-face respirators must not be stored where they will be exposed to radiant heat or sunshine. Fuels, solvents, lubricants, and other flammable substances, including chemicals, must not be stored with masks. Moreover, there must not be any electrical machines or appliances that produce sparks or discharges during operation (ozone creation).
Avoid deformation of the rubber parts of the facepiece and internal gas mask during storage.
